|
 | |
This section will be dedicated to Engine build and build data.
We will also chronicle current builds with commentary and photo's.
The tool room build is what this first chronicle will be titled. Tool Room implies a
certain level of quality, inspection and metrology.
These techniques are used in a totally blueprinted application. We will take three of everything
and focus on the culmination of the best of these parts to make one wide open throttle, tool room
grade master piece.
The scope is to build an engine that will run WOT for prolonged periods at or near
the programmed rev limit. We will be mixing alloys of hi copper silicon magnesium aluminum,
along with titanium. While explanations will be provided with photos it is beyond the scope
of these postings to explain every technique and purpose.
The fuel maps and boost character will be custom and provided for optimization from dyno pulls.
Final dyno maps will be provided to one of the major eeprom groups for custom programming
of the final eeprom set.
The build is currently underway and photo's the first photo's will be posted soon.
|
|
| |